Automated Detection Technology^™ software from VeriPhase^® works with OmniScan^® flaw detectors to quickly process encoded phased array weld data. Once the data is processed, a prepopulated indication table is sent directly to OmniPC^™ software with all relevant position and sizing readings to assist you in your analysis.

Combining Automated Detection Technology (ADT) software and OmniScan flaw detectors:

• Significantly reduces your analysis time
• Helps improve the detection rate and reliability
• Provides high-quality data that’s code compliant
• Enhances your inspection workflow

Fast and Reliable

Phased array flaw detectors collect massive amounts of encoded data very quickly, potentially creating an analysis bottleneck in your workflow.

ADT software processes inspection data files by automatically isolating and sizing indications for you to analyze. The software automatically assesses the data’s quality, including checks for loss of couplant and loss of data.

• Results are sent directly to the indication table in OmniPC software
• Suitable for primary and secondary data review
• Automatic indication length and height sizing

Efficient

The software can process single or multiple group files in seconds, producing a detailed data quality report and indication list. When you select an indication from the list, the software will automatically adjust the view and cursors for quick final disposition. It’s easy to update or delete indications from the list.

• Fast file processing
• Easy to use without a lot of training
• Click and Fly to indication feature for quick disposition

Detailed Reporting

Whether you’re using the software during primary inspection or post-inspection review, it provides you valuable information in a clear, concise format. The detailed quality report helps you to validate your setup parameters, spot data quality issues, and separate listings of populated indications by group.

• Indication list for all groups analyzed
• Quickly confirm you’re using the correct settings
• Verify the quality of your data
• S-scan and C-scan plotting for all indications

Learn more about Automated Detection Technology^™ software from VeriPhase^® here: veriphase.net

NDT SetupBuilder design software is an integral part of the Olympus line of automated and semi-automated ultrasonic testing products. Nondestructive testing (NDT) personnel are able to reduce the time defining the appropriate inspection configuration for OmniScan flaw detectors. This step makes sure that the configuration is compliant with the inspection code, eliminating possible configuration errors.

• Focal law calculator
• Intuitive, simple, and affordable
• 3-D views of parts, wedges, and probes
• Intuitive keyboard shortcuts
• Import/export configuration to the OmniScan MX2 and SX

General Interface

The NDT SetupBuilder software interface is based on two grids: Probe Sets and Groups. The grids are designed to offer quick visualization of probes, wedges, positions, and beam parameters.

Additional interfaces are available for wedge and probe definition and parameter validation.

The wedge menu gives access to wedges available in the Olympus database, plus the details of the model characteristics including length, width, and height. Top, side and end views enable the user to visualize the selected wedge.

Similarly, the probe interface provides access to the available probes and their corresponding parameters in the Olympus database.
NDT supervisors can use PC-based NDT SetupBuilder software to define the inspection technique and set ultrasonic beam parameters for their inspections. Supervisors can define the inspection technique either remotely or on-site, without the need to access an OmniScan. More importantly, following the definition of the inspection technique, the configuration can be imported to the OmniScan MX2 and SX thereby reducing configuration time and manipulation errors prior to the inspection.

Compound Scan

A single-group compound scan offers similar coverage as two sectorial scans

Olympus’ updated NDT SetupBuilder software now offers the capability to perform compound scan beams. This innovative inspection strategy consists of a mix between sectorial and linear beams and offers many advantages such as:

• Higher probability of detection
• Inspection of thicker material
• Higher inspection speed
• Shorter setup and calibration time
• Faster data analysis

Tooltips

Explanations, or tooltips, can be displayed by pointing the mouse over the interface elements, including tabs, toolbars, and dialog boxes. Tooltips include a clear image and a description of the associated function. The software is simple to use, even for inexperienced users.

2-D and 3-D Visualization

The RayTracing view displays a graphically rendered illustration of the part, probes, wedges, and groups in 2-D or 3-D. Display options include side, top, and end view in 2-D. Interactive parameter configuration controls and probe element information are also available.
 

More Than Just a Ray Tracing Tool

Export/Import Your Configuration and Group Description

All configurations supported by the OmniScan and created in NDT SetupBuilder can be exported as an .ondt setup file. NDT SetupBuilder software can also be used as a focal law calculator. Groups not supported by the OmniScan can be exported as .law files.

Export your configurations on a USB key or an SD card and import them into your OmniScan. Once imported, there is no need to go through the inspection configuration menus. Just calibrate, and the unit is fully functional.

NDT SetupBuilder Features

Export setup configuration to the OmniScan MX2 and SX Export .law files Configurable acquisition unit Support plate, pipe and bar geometry Support PA linear, TOFD, UT and dual matrix Support sectorial, linear, single beam, and compound type Custom weld template Custom probe and wedge creation Scan plan report RayTracing Top, side, end, and 3-D views Beam formation and near field information Element deactivation Support true depth and half path focalization type Metric and US customary units

OmniPC is a PC-based data analysis and reporting software that benefits from the same user interface, analysis and reporting features as the OmniScan.

Analysis

With OmniPC, the OmniScan unit can now be used strictly for scanning while analysis is performed simultaneously on a personal computer. This software can also be used in conjunction with extra-large screens for increased visibility, and with keyboard shortcuts for faster operations.

OmniPC software benefits from the same user interface as the OmniScan software. No need to learn new software for the analysis of your OmniScan data files.

Export C-Scan

OmniPC adds a new feature for corrosion applications. You can export the complete C-Scan values to a *.txt file for further analysis. The values can be visualized in the Notepad, Excel, Matlab or any other software in which you wish to do your analysis.

OmniPC Features