The ultra-thin IPLEX TX II video borescope is available with a 2.2 mm diameter flexible scope or a 1.8 mm rigid scope. Using the flexible scope, you can obtain a wide field of view in spaces where the opening is very small for faster inspections and easier decision making. Combining high image quality and user comfort, the IPLEX TX II video borescope enables efficient inspection of castings, molds, and other parts with small cavities.
The IPLEX TX II video borescope offers easier insertion to help you reach your target faster as well as improved image quality that supports your decision making.
IPLEX TX (predecessor)
See More
120-degree field of view to observe a wide area at once, helping speed up inspections
Bright LED illumination enables you to see better in large spaces
Image adjustment methods—like image turning and halation reduction—make it easier to see in reflective areas and capture clear, low-noise images
Scene mode enables you to create two image setting configurations and toggle between them
IPLEX TX II
Inspect in Smaller Spaces
Access small openings with the 2.2 mm insertion tube
Insertion tube with a 2 mm shorter rigid distal end compared to the original IPLEX TX combined with improved hardness and articulation control, making it easier to maneuver in smaller spaces
The insertion tube’s articulating section has a tungsten outer braid for added protection, while its shortened length help keep it from getting stuck
The rigid insertion tube's air injector enables you to blow liquid droplets away to obtain clearer images*
*The protection sleeve is required to use the air injector.
Stay Comfortable During Long Inspections
Ultra-lightweight rigid scope weighs as much as a ballpoint pen, so there’s less strain when you’re holding it for long periods of time
Extend the grip to grasp the tube closer to the insertion point for finer control
Images are displayed on a tablet, so you can position it where it’s comfortable
Durable and Flexible
The flexible insertion tube’s articulation section improves its overall durability
Metal braiding in the articulation section provides additional protection and wear resistance
For applications where it’s required, the optional rigid scope enables you to acquire high-quality images and pass through openings as small as 1.8 mm
With the rigid scope's CMOS imaging sensor, images still transmit to the screen if the tube is slightly damaged
Flexible scope unit
Rigid scope unit
Specifications
Scope Unit
Model No.
Flexible scope unit: IV10212TF
Rigid scope unit: IV10212TR
Insertion tube
Scope diameter
Φ2.2 mm
Φ1.8 mm
Scope length
1.2 m (3.9 ft)
180 mm (0.59 ft)
Distal end length*1
7.85 mm (0.31 in.)
-
Exterior
High durability metal braid with special processed resin
-
Tube flexibility
Uniform stiffness
-
Optical system
Direction of view
Forward
Field of View
120°
Depth of field*2
3–80 mm
Articulation Section
Articulation angle
120° (up/down)
-
Articulation mechanics
Direct manipulation
-
Approx. weight
255 g (0.56 lb)
182 g (0.4 lb)
Control Unit
Model No.
IV10200T
Weight
350 g (0.77 lb)
Dimensions (L × Φ)
172 × 52 mm (6.77 × 2 in.)
Illumination
High-intensity white LED
Power supply
USB power supply
USB connector
Type C connector, Version 2.0 standards
Software Functions
Image manipulations
2x digital zoom, 12-step manual or 8-step auto brightness control
Gain control
2-step adjustable gain control (manual or auto)
Sharpness control
3-step adjustable sharpness control
Saturation control
3-mode adjustable color saturation control (monotone, natural, vivid)
Overlay
Date/Time, logo, and system setting
Still image recording
Resolution
H500 × V500 (pixels)
Recording format
Compressed JPEG format
Video recording
Resolution
H392 × V392 (pixels)
Recording format
MPEG-4 AVC/H.264
Frame rate
30 fps
Operating Environment
Operating temperature
Insertion tube
In air: -25 to 80 °C (-13 to 176 °F), In water: 10 to 30 °C (50 to 86 °F)
Other parts
In air: -10 to 40 °C (14 to 104 °F)
Relative humidity
All parts
15 to 90% (relative humidity)
Liquid resistance
All parts
Operable when exposed to machine oil, light oil, or 5% saline solution
Waterproofing
Insertion tube
Operatable underwater up to a water pressure equivalent to a depth of 1.2 m
Other parts
Operable in blowing rain conditions; not operable under water
*1 Indicates the length of the rigid portion at the scope's distal end.
*2 Indicates the viewing distance with optimal focus.
Accessories
Protection Braid for IV10212TF
Model No.
MAJ-2537
Weight
5.6 g (0.01 lb)
Outer diameter
Φ2.8 mm (0.1 in.)
Braid length
Approx. 1 m (3.3 ft)
Protection Sleeve for IV10212TR
Model No.
MAJ-2538
Weight
32 g (0.07 lb)
Outer diameter
Φ2.3 mm (0.09 in.)
Sleeve length
162 mm (0.5 ft)
Air tube outer diameter
Φ4 mm
Maximum air pressure
0.7 Mpa
Grip Extender for IV10212TR
Model No.
MAJ-2540
Weight
53 g (0.12 lb) (total of three)
Dimensions (L x Φ)
30 × 14 mm (1.2 × 0.6 in.)
48 × 14 mm (1.9 × 0.6 in.)
455 mm × 185 mm × 330 mm (17.9 in. × 7.3 in. × 13 in.) (excluding protrusion)
Weight
2.1 kg (5 lb)
Tablets Tested for Compatibility
Microsoft Surface Pro9
Intel Core i5, 8 GB RAM, Windows 11 Pro (64 bit)
Panasonic FZ-G2
Intel Core i5, 8 GB RAM, Windows 11 Pro (64 bit)
· May not work when combined with other software.
· If you are going to use the IPLEX TX II software with a tablet other than those listed above, please refer to the recommended tablet specifications below.
· If you have any questions, please contact your local Evident representative.
Recommended Tablet Specifications
CPU
Intel Core i5
RAM
8 GB or larger (dual channel)
HDD
8 GB free space or more
Display resolution
1280 × 800 or more
External terminal
USB TypeC
OS
Windows 11 Pro (64bit)
Others
IEC/EN60950-1 or IEC/EN62368-1 compliant
· We do not guarantee that the IPLEX TX II software will work on all tablets that meet the above criteria.