旋转钢坯检测系统（RBIS）
概述
The rotating billet inspection system (RBIS) is a turnkey solution that uses phased array (PA) and eddy current array (ECA) technology integrated into a fully automated testing system to meet stringent requirements for volume and surface inspections. Key benefits include:
Designed to be an easy-to-use solution that provides repeatable results, the system includes:
|  |
Complete Billet Inspection
Full Body Inspection with Phased Array
While the billet is rotated, the inspection head travels on a gantry along its length. Air cylinders move the wedges down at the beginning of the inspection sequence and up at the end.
The probes are mounted in Olympus water wedges that have many degrees of freedom and pneumatic suspension, helping ensure optimal coupling.
Specific wedges are used for longitudinal and shear waves to inspect both the billet’s volume and subsurface.
Surface Inspection with Eddy Current Array
Surface-breaking defects are inspected using eddy current array. A special probe holder is used to enable in-contact inspection with optimized lift-off for any billet diameter. The probes feature a ceramic face, making them resistant to damage.
High-Quality Results
The system meets the productivity requirements of the metal manufacturing industry while adhering to the highest international quality standards.
Water WedgeThe water wedge’s degrees of freedom and pneumatic suspension enable it to follow the pipe’s movement. The wedge uses an Aqualene membrane that maintains a thin film of water for excellent coupling. The water path inside the wedge remains undisturbed for high repeatability on small reference defects. Wear plates are available to fit the diameter of your billet. |  |
Advanced Inspection HeadThe electronics are embedded in the inspection head to shorten the cable length and reduce electromagnetic noise. The modular design makes it easy to upgrade or conduct maintenance. A single head can hold up to 8 wedges and 5 QuickScan™ LT and 1 QuickScan ECA acquisition units while accommodating standard options, such as onboard paint marking and a prewet device. Phased Array ProbesPA probes provide a tight overlap between groups of elements that are electronically adjustable depending on the size of the defects, resulting in a high energy density in the billet and repeatable performance. |  |
Automatic Calibration
To achieve a thorough inspection, each probe must be calibrated. During calibration, the apertures of each probe pass over a known defect, and the probe’s gain level is automatically adjusted. This feature enables users to easily perform and validate a precise calibration of each focal law, saving time without relying on the user’s skill.
|  |
软件和采集设备
Phased array (PA) and eddy current array (ECA) technology, a powerful acquisition unit, and advanced software deliver a powerful inspection system.
PA and ECA Acquisition UnitsThe QuickScan™ PA 32:256 module meets IP55 standards, while the QuickScan EC unit provides the flexibility to inspect the billet’s surface. Both units easily integrate into industrial environments. |   |
Easy Setup
QuickView software makes it easy to set up the system and acquire and manage data. The software’s wizard makes it simple to create setups for each part size. The inspection configuration and calibration parameters for each billet diameter are saved and easily retrievable. The final results are merged and displayed to clearly differentiate between accepted and rejected billets.
|  |
Mapping
Using a reference signal at each revolution, the system provides the XY defect position and measures the size of the defect’s surface and its orientation. Data mapping enables the system to perform the 2D marking used by prove-up or automatic grinding applications. |  |
