技术支持

视频陈列馆

主页/ 视频陈列馆

视频陈列馆

Solutions

Thickness Gaging

Corrosion Testing

Remote Visual Inspection

Industrial Scanner

Microscope Solutions

Optical Metrology

Integrated Inspection Systems

XRF/XRD Analyzers

BondMaster 600粘接检测仪：机械阻抗分析方式

SubtitlesAvailable

BondMaster 600粘接检测仪：机械阻抗分析方式

BondMaster 600：如何为探测脱粘缺陷而配置一发一收探头

SubtitlesAvailable

BondMaster 600：如何为探测脱粘缺陷而配置一发一收探头說明In the following video, Product Manager Tommy Bourgelas explains how to configure pitch-catch probes for disbonds using the BondMaster 6000

BondMaster 600：找到检测蜂窝状复合材料的适当频率的高级指导说明

SubtitlesAvailable

BondMaster 600：找到检测蜂窝状复合材料的适当频率的高级指导说明

BondMaster 600：简单直观的粘接检测

SubtitlesAvailable

BondMaster 600：简单直观的粘接检测

EPOCH 650产品介绍

SubtitlesAvailable

EPOCH 650产品介绍說明Introducing the new Epoch 650 flaw detector.

EPOCH 6LT探伤仪：提升检测水平

SubtitlesAvailable

EPOCH 6LT探伤仪：提升检测水平

EPOCH 6LT探伤仪：适用于借助绳索进行攀爬而完成的检测

SubtitlesAvailable

EPOCH 6LT探伤仪：适用于借助绳索进行攀爬而完成的检测

EPOCH LTC软件的安装与升级

SubtitlesAvailable

EPOCH LTC软件的安装与升级說明This video will demonstrate how to upgrade your EPOCH LTC’s instrument firmware using a Windows 7 computer.

EPOCH LT的预览视频

EPOCH LT的预览视频說明EPOCH LT Preview Film

HydroFORM的分析视频

HydroFORM的分析视频

HydroFORM的校准视频

HydroFORM的校准视频

HydroForm相控阵腐蚀检测系统

SubtitlesAvailable

HydroForm相控阵腐蚀检测系统說明HydroForm Phased Array Corrosion System

L&H Industrial的相控阵功效实例证明

L&H Industrial的相控阵功效实例证明

MagnaFORM：如何利用涡流阵列技术检测碳钢焊缝

SubtitlesAvailable

MagnaFORM：如何利用涡流阵列技术检测碳钢焊缝

MXU 4.4软件：机载复合式扫查

MXU 4.4软件：机载复合式扫查說明Creating compound scans onboard your instrument using MXU 4.4 software makes it simple to set up the scan without having to use a PC. A compound scan can reduce the number of acquisition scans per day by a factor of two or more compared the equivalent coverage using a sectorial scan.

MXU 4.4软件：长焊缝检测

MXU 4.4软件：长焊缝检测說明MXU 4.4 software adds the ability to create setups for long seam weld inspection directly on the OmniScan® flaw detector. This type of inspection is made possible by an improved Parts & Weld Wizard and focal law calculator in the instrument. To visualize defects in a curved part, the R-scan will show the corrected position in the part according to the signal in the gate.

NORTEC 600：如何为检测紧固件孔洞进行设置

SubtitlesAvailable

NORTEC 600：如何为检测紧固件孔洞进行设置說明This video details how to set up the NORTEC 600 for fastener hole inspections

NORTEC 600：电导率和涂层

SubtitlesAvailable

NORTEC 600：电导率和涂层

NORTEC 600：表面和近表面检测

SubtitlesAvailable

NORTEC 600：表面和近表面检测

NORTEC 600

SubtitlesAvailable

NORTEC 600 說明NORTEC 600 Product Introduction video

OmniScan MX2产品概述

SubtitlesAvailable

OmniScan MX2产品概述說明OmniScan MX2 Product Overview

OmniScan MX2的坠落测试

OmniScan MX2的坠落测试說明OmniScan MX2 Drop Test

OmniScan MX2的焊缝检测工作流程

SubtitlesAvailable

OmniScan MX2的焊缝检测工作流程說明Showcasing the MX2, Cobra scanner, NDT Setup Builder, and OmniPC for advanced NDT work flow process.

OmniScan MX：使用OmniScan MX仪器完成基本航空航天涡流阵列设置

SubtitlesAvailable

OmniScan MX：使用OmniScan MX仪器完成基本航空航天涡流阵列设置說明The purpose is to show how to start an ECA set up from scratch to get an C-scan image.

OmniScan MX：基本航空航天粘接检测C扫描的设置

SubtitlesAvailable

OmniScan MX：基本航空航天粘接检测C扫描的设置說明The purpose is to show how to start a Bond Testing C-scan set up from scratch to get an c-scan image.

OmniScan MX：新近研发成果与升级情况

SubtitlesAvailable

OmniScan MX：新近研发成果与升级情况說明The latest developments and upgrades to the OmniScan MX platform, with an emphasis on the Eddy Current Array module and Bond Testing C-scan.

OmniScan SX产品介绍

SubtitlesAvailable

OmniScan SX产品介绍說明Overview of the features of new OmniScan SX.

OmniScan SX用于多技术焊缝检测

SubtitlesAvailable

OmniScan SX用于多技术焊缝检测說明Showcasing the OmniScan SX for conventional UT, phased array, and TOFD inspections.

OmniScan SX的坠落测试

OmniScan SX的坠落测试說明Drop testing the new OmniScan SX.

PipeWIZARD V4校准框

PipeWIZARD V4校准框說明PipeWIZARD V4 – Speed up inspection productivity using calibration boxes to get instant verdict and automatic beams adjustment.

PipeWIZARD：为什么要使用自动超声检测系统?

SubtitlesAvailable

PipeWIZARD：为什么要使用自动超声检测系统?說明The PipeWizard phased array scanner is dedicated to the inspection of construction pipeline girth welds.

RollerFORM XL_前导广告

SubtitlesAvailable

RollerFORM XL_前导广告

RollerFORM扫查器：更换相控阵探头

SubtitlesAvailable

RollerFORM扫查器：更换相控阵探头說明Step by step instructions - How to change the probe

Webinar - 复合材料的相控阵检测

Webinar - 复合材料的相控阵检测說明This webinar will review the use of phased array ultrasound methods on composite structures at both the manufacturing and maintenance levels. Inspection equipment and techniques from manual to automated scanning for various flat and shaped CFRP (Composite Fiber Re-enforced Polymers) will be reviewed in detail.

Webinar - 用于腐蚀成像的奥林巴斯双晶线性阵列探头

Webinar - 用于腐蚀成像的奥林巴斯双晶线性阵列探头說明Olympus introduces the new Dual Linear Array™ probe for corrosion inspection that provides advantages over conventional UT transducers used with flaw detectors. This phased array solution improves productivity through features such as larger beam coverage, faster scan speed, and C-scan imaging with increased data-point density. The pitch-catch technique improves near surface resolution and pit detection in corrosion survey applications improving probability of detection of critical wall thinning. This webinar will provide an overview of the basic OmniScan setup, inspection, and live analysis and reporting of corrosion on piping using OmniPC.

使用HPI对铝板进行电导率测量

使用HPI对铝板进行电导率测量

使用NORTEC 600检测碳钢焊缝

SubtitlesAvailable

使用NORTEC 600检测碳钢焊缝說明This video discusses the inspection of carbon steel welds

双矩阵列探头

SubtitlesAvailable

双矩阵列探头說明Dual Matrix Array Probe

在线研讨会 - Omniscan MX2

在线研讨会 - Omniscan MX2 說明Chris Magruder and Francois-Come Beaupre discuss some of the features of the new Omniscan MX2.

在线研讨会 - OmniScan MX2改进的TOFD

在线研讨会 - OmniScan MX2改进的TOFD 說明Through the course of the Webinar participants will learn the benefits of: • New OmniScan module technology that allows simultaneous acquisition from high definition UT board and phased array probes. • Demonstration of new MX2 wizard functions for TOFD setup and acquisition. • Optimization of UT parameters for improved TOFD. (More power less heat) • Improved PRF management for multi group phased array and TOFD inspection. • New improved B-scan TOFD imaging. • New acquisition and analysis display for simultaneous phased array and TOFD inspection. • New addition to the MX2 wizard for TOFD PCS calibration. • Introduction to the HST Lite TOFD scanner and Olympus family of TOFD probes and wedges.

在线研讨会 - PipeWIZARD - 用于管线检测的分区理论和技术

在线研讨会 - PipeWIZARD - 用于管线检测的分区理论和技术說明This Webinar includes an introduction to Phased Array Zonal Inspection Theory and Technology based around the PipeWizard automated pipeline inspection system.

在线研讨会 - 为了使OmniScan MX2进行准确的测量而进行的相控阵TOF校准

在线研讨会 - 为了使OmniScan MX2进行准确的测量而进行的相控阵TOF校准說明Precision phased array calibrations for time of flight measurements combine the phased array calculator and traditional conventional UT wedge delay functions. This webinar is intended to demonstrate use of both UT calibration blocks for procedure compliance along with best practices for optimized phased array results using the OmniScan MX2 and latest software.

在线研讨会 - 使用OmniScan MX2进行相控阵缺陷定量

在线研讨会 - 使用OmniScan MX2进行相控阵缺陷定量說明This Webinar is intended to take the participant through the basics of phased array depth and height flaw sizing with real world examples by expanding on traditional conventional techniques with advanced phased array probes and software. Shear wave tip diffraction, -6dB sizing, high angle longitudinal L-wave, ID Creeping wave, and other advanced techniques will be on display. Additionally, use of the OmniScan measurement cursors, defect table and report are explained and demonstrated. Also on display will be Olympus' new software "OmniPC" for computer based offline analysis of OmniScan data files.

在线研讨会 - 使用OmniScan MX2进行相控阵裂纹定量

在线研讨会 - 使用OmniScan MX2进行相控阵裂纹定量說明This webinar is intended to demonstrate use of common crack sizing techniques and best practices for optimizing the OmniScan MX2 for manual and semi-automated crack detection and sizing.

在线研讨会 - 使用新款奥林巴斯相控阵轮式探头快速完成无水浸CFRP检测

在线研讨会 - 使用新款奥林巴斯相控阵轮式探头快速完成无水浸CFRP检测說明Olympus introduces the RollerFORM, a new phased array wheel probe designed for inspecting composites, CFRP, and other smooth materials such as those commonly used by the Aerospace industry. An affordable and easy-to-implement replacement for full 2D encoding systems, the RollerFORM also offers a viable option to immersion techniques. The unique tire material of the RollerFORM has been specifically developed to guarantee high-quality immersion-like ultrasound testing. This webinar will provide an overview of the RollerFORM wheel probe inspection including mechanical and phased array setup, acquisition, and analysis of composite defects using Olympus OmniScan SX and OmniPC for offline analysis.

在线研讨会 - 使用涡流阵列技术对应力腐蚀开裂缺陷进行检测

在线研讨会 - 使用涡流阵列技术对应力腐蚀开裂缺陷进行检测說明This Webinar includes an overview of the exciting new Eddy Current Array solution for the detection of stress corrosion cracking in refinery process piping using the new user-friendly MXE 3.0 software of the OmniScan MX flaw detector.

在线研讨会 - 使用编码相控阵技术改进小直径管道焊缝的检测

在线研讨会 - 使用编码相控阵技术改进小直径管道焊缝的检测說明This webinar provides a brief overview of the physics of phased array ultrasound and demonstrates the benefits of this innovative technology for the inspection of small diameter piping in new construction or during the maintenance of boilers, heaters, cracking furnaces and other piping systems. Although radiography has been the inspection tool of choice for many years for these inspections, this 45-minute presentation discusses the many advantages of phased array ultrasound: mainly faster and safer inspections without shutting down the work area around the inspection and providing additional flaw measurement capability over radiography. The latest advances in portable semi-automated ultrasonic systems along with low-profile scanners, probes and wedges optimized for small diameter piping are important factors that have contributed to the acceptance of phased array in the petrochemical and related industries.

在线研讨会 - 对难以检测的材料进行相控阵检测

在线研讨会 - 对难以检测的材料进行相控阵检测說明Inspection of Austenitic Stainless Steel, Cladded Welds, Dissimilar Metals and Alloys using the OmniScan MX PA

在线研讨会 - 用于奥氏体不锈钢和异种金属焊缝检测的高级相控阵探头策略

在线研讨会 - 用于奥氏体不锈钢和异种金属焊缝检测的高级相控阵探头策略說明This presentation will provide a general overview of probe technology used in austenitic weld inspection and how it is deployed in portable phased array systems including live demonstration of austenitic flaw sizing and detection.

在线研讨会 - 用于焊缝检测的相控阵探头的发展情况

在线研讨会 - 用于焊缝检测的相控阵探头的发展情况說明Understanding probe optimization and beam limits is essential for confident repeatable inspection results. Using the OmniScan MX2 and SX instruments, this webinar will include live demonstration of Olympus New Weld Series Probes and Olympus DMA (Dual matrix array) Probes for best practice OmniScan setup and beam characteristic measurements to ASTM 2491.

在线研讨会 - 相控阵扫查计划的发展情况

在线研讨会 - 相控阵扫查计划的发展情况說明Scan planning is an integral, yet somewhat neglected step in the everyday Phased Array (PA) inspection process. Success in proper scan planning leads to reliable results, higher productivity, and ensures repeatability but can often be difficult due to the varying nature of the PA technique and its application. This course offers a chance for attendees to learn advanced scan planning concepts, implementation of different PA inspections, and achieve a better overall understanding of the benefits and limitations of Phased Array. Recommended for those with experience or knowledge in PA and those wanting to learn more about this ever-growing technology.

在线研讨会 - 相控阵检测技术用于腐蚀成像的优势

在线研讨会 - 相控阵检测技术用于腐蚀成像的优势說明Tune in to this webinar and hear from our expert at Olympus on the latest solutions for the nondestructive testing of pipes and vessels for wall thickness loss due to corrosion or erosion. The HydroFORM and RexofFORM systems built for the OmniScan MX2 phased array flaw detector are designed to bring encoded corrosion mapping capability without the use of high-speed computer-based mechanical raster scanners.

在线研讨会 - 粘接检测C扫描 - 使用OmniScan MX对复合材料蜂窝结构进行检测

在线研讨会 - 粘接检测C扫描 - 使用OmniScan MX对复合材料蜂窝结构进行检测說明This Webinar includes an introduction and overview of the innovative new Bond testing C-scan solution for the inspection of composite honeycomb structure using the OmniScan MX flaw detector. Attendees will learn about the powerful benefits of this solution and its advantages compared to existing techniques of testing composite materials. Attendees will learn why bond testing is possible with an eddy-current based instrument and will be shown the different scanning options featuring a new hand scanner. Attendees will see a live demonstration of the new MXB software’s simplicity and dynamic inspection capabilities that is dedicated to Bond Testing. You will learn about pitch-catch bond testing method, multiple frequency scanning, amplitude and phase displays, system calibration, data interpretation and archiving.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第一部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第一部分說明Part one of the series will cover the essential ingredients of phased array and basic theory. It is geared toward understanding the equipment basics used to generate phased array inspections and includes the introduction to the OmniScan MX2 software user interface.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第一部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第一部分說明Primera parte de la serie que cubrirá los puntos esenciales y la teoría basica del Phased Array. Orientado a la comprensión de los conceptos básicos del equipo, utilizados para realizar inspecciones Phased Array, incluyendo una introducción al software del OmniScan MX2. Se explicará, la configuración de los módulos del equipo, información sobre palpador y suela, y conceptos básicos para la formación del haz de un único scan sectorial, típico para inspecciones manuales, mientras se aprende como introducir y/o controlar todos éstos parámetros en el software del OmniScan MX2.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第三部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第三部分說明Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection. There will be a brief review of the previous Webinar that leads into the current topics. This will combine sector scan basics, and MX2 displays readings, and parameters in preparation for a manual sector scan weld inspection.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第三部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第三部分說明Tercera parte de la serie que cubrirá la configuración de puertas y C-Scan para inspección de soldadura, opciones de calibración y limitaciones, e incluye una explicación y demostración del asistente de calibración del OmniScan MX2 para inspección manual. Se realizará un pequeño recordatorio del la webinar anterior como introducción los temas que nos ocupan. Esta combinará los principios básicos de un scan sectorial, lecturas de medidas del MX2, y parámetros para la preparación del una inspección manual de una soldadura con un scan sectorial.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第二部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第二部分說明Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第四部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第四部分說明Part four of the series will cover inspection and analysis with an emphasis on flaw sizing and characterizations using the sector scan data view.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第四部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测 - 第四部分說明Cuarta parte de la serie que cubrirá inspección y análisis con especial atención a la caracterización y dimensionamiento de defectos utilizanzo la vista sectorial (S-Scan). El usuario aprenderá y verá ejemplos de como se utilizan las herramientas del OmniScan MX2 para medir y guardar los datos de una inspección manual. Incluirá los pros y los contras de las exploraciones sectorial y lineal, estrategias de focalización y cobertura, y ejemplos de aplicaciones mientras se aprende a navegar por el software del OmniScan MX2.

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测- 第二部分

在线研讨会 - 通过使用OmniScan MX2介绍相控阵检测- 第二部分說明Segunda parte de la serie que cubrirá los principios básicos del scan sectorial y la introducción a las distintas presentaciones y vistas de los datos normalmente utilizadas en las inspecciones automatizadas de UT y Phased Array. Incluye la utilización del asistente de configuración de grupos del OmniScan MX2, así como de los parámetros UT. Se realizará un pequeño recordatorio del la webinar anterior como introducción los temas que nos ocupan. Esta combinará el palpador, suela, y formación del haz, utilizando la presentación de scan sectorial (S-Scan) y la optimización del OmniScan MX2 para la inspección manual de una soldadura.

在线研讨会 - 高级超声检测技术的不同用途：管线制造、建筑及维护

在线研讨会 - 高级超声检测技术的不同用途：管线制造、建筑及维护說明“Ultrasonic phased array testing is a powerful NDT technology and one whose use is growing rapidly in particular for the inspection of welds in small and large diameter pipelines. This free webinar provides a brief introduction of ultrasound phased array testing and outlines the various benefits of encoded automatic testing (AUT) versus radiography (RFT) in terms of cost, user friendliness, and detectability. It will provide some guidelines for selecting probes and instruments and address specific examples of real-world applications…….. etc. You should attend whether you are a novice in NDT or an experienced NDT inspector and want to know more about how to make significant improvements in you inspection methods.”

在线研讨会：使用NORTEC 600检测碳钢焊缝的改进方式

在线研讨会：使用NORTEC 600检测碳钢焊缝的改进方式

在线研讨会：使用NORTEC 600检测紧固件孔的改进方式

在线研讨会：使用NORTEC 600检测紧固件孔的改进方式說明This Webinar is an introduction and overview to the fastener hole inspection solution in aerospace applications using the NORTEC 600 eddy current flaw detector.

在线研讨会：在使用复合式S扫描的相控阵扫查计划的设计方面的发展情况

在线研讨会：在使用复合式S扫描的相控阵扫查计划的设计方面的发展情况

在线研讨会：衍射时差的介绍及其在无损检测领域中的作用

在线研讨会：衍射时差的介绍及其在无损检测领域中的作用

奥林巴斯为风电工业提供的解决方案

奥林巴斯为风电工业提供的解决方案說明Olympus NDT product and application showcase for Wind Power industry tradeshow.

搅拌摩擦焊检测解决方案

SubtitlesAvailable

搅拌摩擦焊检测解决方案說明Friction stir welding (FSW) is a method using frictional heat created by a rotating tool to join two parts. When errors occur, such as excessive or insufficient heating, the FSW process can introduce various flaws at different locations in the weld. Olympus has developed a fully automated solution to inspect friction stir welds in fuel tanks fabricated for the aerospace industry. See how this phased array (PA) inspection system provides complete inspection coverage of friction stir welds in large tanks, reliably and efficiently.

水浸演示

水浸演示說明EPOCH LTC: Immersion Demonstration

火车轮自动检测系统

火车轮自动检测系统

用于地表采矿业的相控阵检测解决方案

SubtitlesAvailable

用于地表采矿业的相控阵检测解决方案說明Olympus presents Phased Array Ultrasound inspection solutions and considerations for the Surface Mining Industry.

采用无损检测技术进行桥梁检测

SubtitlesAvailable

采用无损检测技术进行桥梁检测

铁轨检测：利用无损检测超声技术

SubtitlesAvailable

铁轨检测：利用无损检测超声技术

铸造工业的铸造部件

SubtitlesAvailable

铸造工业的铸造部件說明Nondestructive Testing: Casting Components in the Foundry Industry

问题与答案：我们要选用哪种相控阵技术：横波端点衍射，还是波幅落差定量？

问题与答案：我们要选用哪种相控阵技术：横波端点衍射，还是波幅落差定量？說明Chris Magruder answers a user question, "For precision sizing of weld flaws using OmniScan phased array inspection, which is the preferred technique: Shear wave tip diffraction or amplitude drop sizing?"

Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.

Sorry, this page is not available in your country