NDT Solutions
- Flaw Detectors / Phased Array Flaw Detectors
- Thickness Gauges
- Transducers and Probes
- Single and Dual Element Transducers
- Angle Beam
- Atlas European Standard
- AWS Wedges & Transducers
- CDS Wedges
- Contact
- Delay Line
- Dual Element
- EMAT
- High-Frequency
- Immersion Transducers
- Immersion Special
- Immersion Accessories
- Integral Angle Beam
- Normal Incidence Shear Wave
- Protected Face
- RTD
- Special Applications
- Spot Weld
- Standard Angle Beam
- TOFD
- Test Blocks
- Transducer Cables
- Couplant & Adaptors
- Eddy Current Probes
- Probes for Tube Inspection
- Phased Array Probes
- EdgeFORM
- Weld Series
- Dual Array Probes for Welds
- Dual Array Probes for Corrosion
- Flexible Phased Array Probe
- Manual Contact Probes
- Small-Footprint Probes
- Universal Probes
- Near-Wall Probes
- Deep Penetration Probes
- Immersion Probes
- Curved Array Probes
- Immersion Corner Wedges for Curved Array Probes
- Integrated Wedge and Code Compliant Probes
- Wedges
- HTHA Probe
- RexoFORM Wedge
- BondMaster Probes
- Single and Dual Element Transducers
- Automated Inspection Systems
- NDT Systems Instrumentation
- NDT Industrial Scanners
- Evident Connect
- Software
Industrial Microscopes
- Laser Confocal Microscopes
- Digital Microscopes
- Measuring Microscopes
- Cleanliness Inspector
- Light Microscopes
- Semiconductor Wafer & Flat Panel Display Inspection Microscopes
- AR Microscopes
- Industrial Stereo Microscopes
- Digital Cameras
- Image Analysis Software
- Microscope Objective Lenses for Industry
- OEM Microscope Components for Integration
- Industrial Microscope FAQ
- Customized Solutions
Eddy Current Air conditioner Probes
Overview
TEC/TED - Attached/Detachable
The eddy current air conditioner probes offer solid construction for durability. They include a differential bobbin set and a circumferentially sensitive pancake array. They offer better detection capability at the transition zone in addition to detection of circumferentially oriented cracks.
Recommendations
Heavy tube wall: TEC and TED probes are not recommended for wall thicknesses over 2.0 mm (0.08 in.), because the inspection may be limited to the inside. Note that these probes require the TE-ADP-004 adapter.
Features
- Solid construction for durability.
- Includes a differential bobbin set and a circumferentially-sensitive pancake array.
- Detection of circumferentially-oriented cracks.
- Better detection capability in the transition zone.
- Ideal for air-conditioner tubing.
Probe design
The air conditioning probe combines pancake arrays with standard differential bobbins for detection of circumferentially oriented cracks.
Standard/Custom Probes (Made to Order)
Use the nomenclature and the chart below to configure your part number.
| Probe Type |
Probe Diameter *
(use mm in part ID) | Center Frequency |
Cable Length
(TEC only)** | |
| mm | in. | |||
| TEC: Attached
TED: Detachable (Use with TEZ-ACS or TEZ-ACK cables.**) | Standard TEC: 9.6 mm to 50 mm TED: 11 mm to 50 mm by 0.2 mm Custom (TEC only) 50.2 mm to 100 mm | Standard TEC: 0.378 in. to 1.969 in. TED: 0.433 in. to 1.969 in. by 0.008 in. Custom (TEC only): 1.976 in. to 3.937 in. |
015 (Low)
050 (Mid) 250 (High) 600 (Very High) |
15 m (50 ft)
20 m (65 ft) 30 m (100 ft) |
| **TEZ cable information for TEB probes is available in the Tube Inspection Probe Catalog. | ||||