Overview

TEG - Attached

The eddy current flexible probes offer solid stainless steel construction for durability and titanium protective cover for the coils. They are designed to inspect tight U-bend (as low as 50 mm curvature radius).

Recommendations

TEG probes are designed to inspect tight U-bends with radius of curvatures as low as 51 mm (2 in.). These probes are designed to inspect one half of the U-bend (90°) from each side of the tube.

Features

Solid stainless steel construction for durability.
Titanium protective cover for coils.
Tight U-bend capability (with curvature radius as low as 50 mm [2 in.]).

Standard/Custom Probes (Made to Order)

Use the nomenclature and the chart below to configure your part number.

Tube curvature and radius

TEG inspects tubes with a maximum of 90º bend one side a time. Minimum radius is 51 mm.

Probe Type	Probe Diameter (use mm in part ID)		Center Frequency	Cable Length**
	mm	in.
TEG: Flexible bullet	Standard 11 mm to 25.4 mm by 0.2 mm	Standard 0.433 in. to 1.000 in. by 0.008 in.	015 (Low) 050 (Mid) 250 (High) 600 (Very High)	25 m (80 ft) N = Nylon H = More flexible
**Information on cables for TEG probes with superior flexibility is available in the Tube Inspection Probe Catalog.

Eddy Current Flexible Bullet Probes

Redirecting