Phased array testing helps make corrosion inspection fast and efficient. Our solutions enable inspectors to be more productive and collect higher resolution data with fully encoded C-scan imaging.
The HydroFORM® scanner, FlexoFORM™ scanner, RexoFORM wedge, and Dual Linear Array™ probe offer efficient inspection options for detecting loss of wall thickness due to corrosion, abrasion,
and erosion. Our solutions can also detect mid-wall damage, such as hydrogen-induced blistering or manufacturing-induced laminations, and easily differentiate these anomalies from loss of wall thickness.
扫查方式
Manual and manual encoded
The Dual Linear Array™ probe is a cost-effective corrosion inspection solution. When fitted with an Olympus encoder, the probe can be used for encoded C-scan imaging with 1 mm near-surface resolution.
The RexoFORM and VersaMOUSE provide one-line encoded scans, or 2-D mapping using the integrated indexing button.
An easy-to-deploy 2-axis encoding PA solution, the HydroFORM semiautomated scanner enables fast and reliable high-resolution data acquisition of large surfaces. To ease raster scanning, it’s equipped with X and Y encoders, a unique water column system, and coupling check and position indicators.
Semiautomated
The innovative FlexoFORM scanner makes challenging pipe elbow corrosion inspection easier. The scanner’s flexible phased array technology enables it to map the entire surface of an elbow.
The MapSCANNER is a semiautomated, 2-axis corrosion inspection scanner. When combined with the HydroFORM or Dual Linear Array (DLA) phased array corrosion mapping solutions, it is a powerful, efficient tool for C-scan imaging of remaining wall thickness and mid-wall anomalies.
The ChainSCANNER provides a manual pipe-inspection solution for pipes between 1.75 to 38 in. OD. The scanner, held by chain links instead of magnetic wheels is well suited for weld or corrosion inspection on different type of materials. UT, TOFD, PA.
Automated
The MapROVER is a fully automated, motorized 2-axis corrosion mapping scanner. When combined with the HydroFORM phased array corrosion mapping solution, it is a powerful tool for C-scan imaging of remaining wall thickness and mid-wall anomalies.
The SteerROVER is a fully automated, steerable motorized 2-axis scanner capable of performing corrosion mapping in remote locations. When combined with the HydroFORM or the DLA phased array corrosion mapping solutions, it is a powerful tool for C-scan imaging of remaining wall thickness and mid-wall anomalies.
在技术规格方面的比较
DLA Corrosion
DLA Corrosion
FlexoFORM
HydroFORM
RexoFORM
RollerFORM
Phased array probe
REX2
REX1
FA1
7.5L64-I8
A12, A14
WP1
Maximum one-line scan coverage (width)
60 mm
32 mm
64 mm
60 mm
38 mm (A12), 60 mm (A14)
51.2 mm
Delay line medium
Rexolite
Rexolite
Water
Water
Rexolite
Water/acoustic polymer
Delay line height
7.5 mm
7.5 mm
9 mm
14 mm or 38 mm
20 mm
25 mm
Position of 2nd interface echo (in steel)
N/A
N/A
34 mm
Short plate: 54 mm
Tall plate: 114 mm
50 mm
28 mm
Max. recommended thickness (in steel)
30mm (5 deg. roof)
95 mm (1 deg. roof)
30mm (5 deg. roof)
95 mm (1 deg. roof)
30 mm
50 mm (14 mm delay line)
150 mm (38 mm delay line)
46 mm
25 mm
Typical near-surface resolution (1/8 in. FBH)
1 mm
1 mm
2 mm
1.5 mm
2 mm
3 mm
OD inspection range
4 in. and greater
4 in. and greater
4.5 in. and greater
4 in. and greater
4 in. and greater
4 in. and greater
ID inspection range
10 in. and greater (16 in. with index encoder)
N/A
N/A
10 in. and greater (16 in. with index encoder)
N/A
20 in. and greater
Contact device with surface
Wheels
Carbides
Wheels
Wheels
Carbides
Wheels
Footprint
110 mm x 130 mm
40 mm × 65 mm
92 mm × 230 mm
110 mm x 130 mm
40 mm x 95 mm
144 mm × 144 mm
Scan direction
Circumferential
Circumferential
Longitudinal
Circumferential
Circumferential
Longitudinal and Circumferential
Scan speed at 1 mm x 1 mm resolution
123 mm/s
300 mm/s
123 mm/s
123 mm/s
123 mm/s
123 mm/s
软件
OmniScan MXU Acquisition Software
OmniScan MXU software displaying A-scan, S-scan, and C-scan views of corrosion.
The OmniScan software has a full range of tools and displays for corrosion mapping applications:
A-scan and thickness readings export to third-party software.
Wizards for easy and fast setup and calibration.
Minimum thickness monitoring during inspection.
Full high-resolution A-scan storage.
Thickness and position values for individual data points, a selected zone, or an entire scan.
A-scan synchronization on the interface echo.
Amplitude and position C-scan capability for two gates.
Onboard report generation and printing capability directly from the instrument.
TomoView Analysis Software
TomoView software displaying A-scan, S-scan, and C-scan views of corrosion.
Computer-based data analysis software with a full range of corrosion evaluation features:
A-scan and thickness readings export to third-party software.