概述

	Be Ready for What’s Next: OmniScan X4 Flaw Detector A portable yet powerful solution, the speed and versatility of the OmniScan™ X4 multitechnology series boosts your productivity while increasing confidence in your assessments. Exploit its advanced phased array capabilities, efficient total focusing method (TFM), and innovative phase coherence imaging (PCI) to detect and interpret challenging flaws and secure the integrity of your assets by identifying damage earlier. Download the OmniScan X4 Brochure

Be Ready for What’s Next: OmniScan X4 Flaw Detector

A portable yet powerful solution, the speed and versatility of the OmniScan™ X4 multitechnology series boosts your productivity while increasing confidence in your assessments. Exploit its advanced phased array capabilities, efficient total focusing method (TFM), and innovative phase coherence imaging (PCI) to detect and interpret challenging flaws and secure the integrity of your assets by identifying damage earlier.

Download the OmniScan X4 Brochure

Proven to Perform, Trusted to Deliver

Each OmniScan X4 unit is a complete multitechnology inspection toolbox, enabling you to exploit multiple ultrasonic testing techniques. Leverage its detection and measurement capabilities to accurately identify and evaluate the severity of damage before it becomes critical, protecting welds, components, and assets most susceptible to cracking or corrosion.

Assess with Certainty Using PCI

Eliminate doubt through phase coherence imaging’s capacity to detect and accentuate historically difficult-to-detect flaws, including hook cracks and stress corrosion cracking (SCC). Use PCI to clearly distinguish individual flaws in colonies of fine cracks and characterize them with certainty.

Discover the Advantages of PCI

What Are PCI’s Applications

3x Faster TFM Acquisition Rate

Obtain crisp TFM imaging at up to three times faster* acquisition rates than the predecessor model (X3 64) thanks to the OmniScan X4 series’ improved processing power. Exploit the increased speed and 128-element capacity of the OmniScan X4 64:128PR unit to perform TFM inspections with extended focusing capabilities.

Learn the FAQs about TFM

Download Our free TFM ebook

*Achieving this speed depends on the configuration and the use of sparse firing. Inquire for more details.

Gain Instant Insights and Eliminate Inefficency

Twice the Confidence with Twin TFM and PCI

Exploit the individual attributes of PCI and TFM to thoroughly investigate the volume of welds from both sides simultaneously. Use two probes to scan the weld in one pass, displaying TFM and PCI results to compare, measure, and confirm your characterization of indications with efficiency and precision.

Engineered for Speed and Simplicity

Performing phased array, TOFD, TFM, and PCI is straightforward and intuitive on the OmniScan X4 series. Inspectors of any experience level can exploit these techniques with increased efficiency and more confidence utilizing the simple step-by-step scan plan and application presets.

Convenient Application Presets

Improve the learning curve and increase the reliability and consistency of inspections between operators with the OmniScan X4 application presets. Even low-level users and new users can produce an optimal PA or PCI configuration within minutes.

With options for corrosion and composite inspections, these preprogrammed parameters simplify scanning setups using HydroFORM™, FlexoFORM™, and RollerFORM™ scanners, and you can adjust the settings as needed.

Ease Complex Configurations

The OmniScan X4 scan plan’s intuitive step-by-step 3D graphics ease your inspection setups, from the most basic to the most complex.

When setting up your raster scan plan, the scan axes can be customed named and you can create a datum reference point relative to the asset. These real-world references as well as the true orientation correction, greatly ease the creation of an intuitive schematic representation of the inspection data for your report.

应用

Choose the Right Model for Your Application

Each model of the OmniScan X4 series has the capability to drive probes with a certain number of elements, offering varying focusing capabilities for different materials and thicknesses. Here is an overview of the types of applications that the four models are most proficient at performing. Contact us or your Evident representative for more details.

16:64PR
Excels at the following applications:

Corrosion monitoring
Pipeline integrity
Manual PA/TFM
TOFD
Small piping

16:128PR
Excellent mid-range model for:

Thin weld ( 25 mm)
Wind blade manufacturing
Aerospace flaw detection

32:128PR
Enables high-productivity weld inspection including coarse-grained materials:

Thick welds, up to ~75 mm
Austenitic/CRA
Occasional TFM
Oil and gas

64:128PR
Higher-productivity weld inspection in thicker, coarse-grained materials:

Very thick welds, ~100 mm (using a 64-element aperture to improve sizing accuracy)
Austenitic/CRA
Intensive TFM (HTHA)
Advanced oil and gas and power gen
FMC collection and application development

Complete NDT Solutions

To meet your application needs, Evident offers complete solutions including probes and wedges, scanners, and software to complement your OmniScan X4 unit. Explore our range of equipment solutions for these applications.

HTHA Solutions

Corrosion Solutions

Weld Solutions

机载软件

Designed to Evolve

Unleash Your Inspection Potential with the Latest MXU Update

Every time you update your OmniScan X4 onboard software (MXU), you gain new features that expand your capabilities and facilitate your work, without having to reinvest.

Our free quarterly updates of MXU enable you to stay on the cusp of technique and technology developments in the rapidly evolving NDT sector.

OmniScan Black Box App

Installing the OmniScan Black Box app on your OmniScan X4 unit enables you to control it remotely using data acquisition software, including:

Combining the advanced analysis tools of WeldSight or AeroView software with the portable battery-operated OmniScan X4 unit helps streamline your workflow and increase your productivity.

NDT Device Application Programming Interface (API)

Communication between the software driving the OmniScan X4 unit and Black Box app uses the NDT Device API protocol developed by Evident. This is an open programming language that you can use to integrate an OmniScan X4 into your inspection ecosystem. To enquire about using the NDT Device API to implement a remote-controlled OmniScan X4 configuration, contact us or your Evident representative for details.

Master Your FMC Data

Are you interested in experimenting with FMC data to develop advanced and novel applications? With the OmniScan X4 64:128PR model driven by a computer* via the Black Box app, you can acquire the elementary A-scans from your stored FMC data. Utilize this raw data to reconstruct TFM imaging or other image reconstruction patterns.

Contact us or your local sales representative for more details.

*Note that your computer must be running a program capable of processing raw FMC data.

OmniPC 6

Our complimentary OmniScan companion data analysis software for PCs is designed to meet most basic phased array, TOFD, and TFM analysis needs.

Key Advantages of OmniPC 6 Software

The user-friendly and flexible features of OmniPC 6 include:

Familiar OmniScan user interface eases the learning curve.
Convenient shortcuts speed up navigation.
Multiple sessions can be open on one computer for increased efficiency.
Data acquisition can be “replayed,” and you can adjust Gain, apply the Auto 80%, and slide the Data cursors at any time.
Skew, Scan Offset, and Index Offset can be adjusted during analysis to improve accuracy.
Use the gate in True Depth or Sound Path or change the Zoom Palette to locate indications faster.
Corrosion inspections: Gates A, B, and I are available with various lists of readings.
TOFD inspections: Recalibrate your wedge delay and PCS in your TOFD files, and synchronize and remove the lateral wave as required.
Different data exporting options are available to meet your reporting needs.

Compatible Software for Setup and Analysis

Leverage our range of compatible PC software to ease your inspection workflow, optimize your data analysis, and facilitate code-compliant reports.

ScanPlan Software
Using all the familiar tools offered in the OmniScan X4 unit, build your scan plan on a PC and manage your inspections with more flexibility and efficiency.

WeldSight™ Software
Perform advanced analyses of OmniScan X4 weld inspection data. Use the WeldSight Remote Connect app to remotely control phased array inspections via your WeldSight PC.

AeroView Software
AeroView software is optimized with customized layouts and tools to ease compliant aerospace and aviation data analyses. Use the OmniScan X4 Black Box app to remotely control phased array inspection via your AeroView Inspection PC.

Flexible Tools to Ease Your PAUT and TOFD Data Analysis

修正采集过程中出现的疏漏

OmniPC软件在检测后分析的过程中可以更改夹角、扫查偏移和步进偏移，以提高数据的准确性，并避免重复采集。

可调整的闸门和动态读数

闸门A、闸门B和闸门I可提供各种读数列表（用于腐蚀检测）。

重播采集

可随时调整增益，应用自动80%，并滑动数据光标。

B-Scan Screening

C-Scan Screening

Identify Indications with Ease

Use the gate in True Depth or Sound Path or change the Zoom Palette to locate indications faster.

TOFD Recalibration

Recalibrate your wedge delay and PCS in your TOFD files. Synchronize and remove the lateral wave as required.

Easily Extract and Export Data for Reports

Different exporting options are available to meet your reporting needs.

技术规格

Specifications are listed for all models unless stated otherwise

General and Enclosure

Size	335 mm × 221 mm × 151 mm (13.2 in. × 8.7 in. × 5.9 in.)
Weight	5.7 kg (with 1 battery) for model 16:64PR 5.9 kg (with 1 battery) for models 16:128PR, 32:128PR, and 64:128PR
Onboard Storage	1 TB internal SSD storage. Maximum 25 GB individual file size. Storage extensible using external USB drive
Storage Devices	SDHC and SDXC cards, or most standard USB storage devices
Wireless	Wi-Fi® 6E and Bluetooth® 5.3 onboard
PAUT Connectors	1 PA connector, 2x UT channels (2 P/R connectors each)
Available Configurations and Groups	OmniScan X4A – 64 :128PR : 8 groups OmniScan X4A – 32 :128PR : 8 groups OmniScan X4A – 16 :128PR: 8 groups OmniScan X4B – 16 :64PR: 2 groups (PA, UT, or TFM) or a specific configuration of 2 PA groups + 1 TOFD
Drop Testing	Drop-tested according to MIL-STD-810G
Ingress Protection Rating	IP65 Certified (completely protected against dust and water jets from all directions (6.3mm nozzle))
Display	269 mm (10.6 in.) TFT LCD with resistive touch screen, 1280 × 768 pixels
Battery	2 hot-swappable Lithium-ion batteries included, 87 Wh each
Battery Life	Minimum of 5 hours (using ISO18563 standard setup parameters)
Operating Temperature	−10 to 45 °C (14 °F to 113 °F)
Storage Temperature	−20 °C to 60 °C (−4 °F to 140 °F) (with battery inside) −20 °C to 70 °C (−4 °F to 158 °F) (with no battery inside)

Inputs and Outputs

Ports	2x USB 3.1, 1x video out (HDMI), 1x SDHC memory card slot, 1x communication (Ethernet)
Encoders	2-axis encoder line (quadrature or clock/direction)
Digital Inputs and Outputs	4 digital inputs (TTL), 4 digital outputs (TTL) including one reserved for acquisition on/off
External DC Supply	18 VDC, circular 2.5 mm diameter connector, center-positive

General Ultrasonic Specifications

Effective Digitizing Frequency	Up to 100 MHz; User-adjustable compression factor
Maximum Pulse Repetition Rate (PRF)	Up to 20 kHz; Actual maximum PRF is often limited by physics (the time of flight required to obtain the ultrasonic signals)
Maximum Number of A-Scan Data Points	Up to 16,384
A-Scan Bit Depth	16 bits
Rectification	RF, full wave, half wave+, half wave−
Video Filtering	Smoothing (adjusted to the probe frequency range)
Filtering	PA channel: selection of band-pass filters, high-pass filters, and averaging UT channel: selection of low-pass filters, band-pass filters, high-pass filters, and averaging
Time-Corrected Gain (TCG)	PA: 40 dB per step of min. 0.1 dB UT: 100 dB per step of min. 0.1 dB Maximum slope of 40 dB/10 ns
Supported Beam Types (Groups)	Selection of phased array ultrasonics (PAUT) beam types (linear, sectorial, and compound), single ultrasonic beam (UT), time-of-flight-diffraction ultrasonics (TOFD), total focusing method (TFM), phase coherence imaging (PCI), full matrix capture (FMC), and plane wave imaging (PWI)
Raw Full Matrix Capture (FMC) Data Collection	Available only with model 64:128PR when using the NDT Device API or the OmniScan Black Box onboard application used with external acquisition software

Acoustic Specifications

		PA Channel	UT Channels
Certification	Calibration Certification	ISO 18563-1:2022	EN22232:2020
	Pulse Width	Adjustable from 30 ns to 1000 ns; resolution of 5 ns (half period of bipolar pulse or duration of negative pulse)	Adjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
	Pulse Shape	Bipolar negative-positive square pulse	Negative square pulse
Receiver	Gain Range	0 dB to 80 dB; maximum input signal 900 mVp-p (full-screen height).	0 dB to 120 dB; maximum input signal 30 Vp-p (full-screen height)
	System Bandwidth	0.2 MHz to 26.5 MHz	0.25 MHz to 28.5 MHz

PAUT Specifications

OmniScan X4 Variant	64:128PR	32:128PR	16:128PR	16:64PR
Maximum Pulsing Aperture	64	32	16	16
Maximum Number of Receiving Channels	128	128	128	64
Number of Focal Laws	1024 maximum total (512 maximum per group)

FMC / TFM / PCI / PWI Specifications

OmniScan X4 Variant	64:128PR	32:128PR	16:128PR	16:64PR
Maximum Extended Aperture (FMC)	128	64	32	32
Maximum Aperture (PWI)	64	32	16	16
Maximum TFM or PCI Groups	4	4	4	2
Live TFM Envelope	Yes – Actual Hilbert Transform
Image Resolution	Up to 1024 × 1024 (1M points) for each TFM or PCI wave set
FMC Supported Wave Sets (TFM or PCI Modes)	Pulse-Echo: L-L, T-T, and TT-TT Self-Tandem: TT-T, TT-TTT, LL-L, LT-T, TL-T, TT-L, and TL-L
PWI Supported Wave Sets (TFM or PCI Modes)	Pulse-Echo: L-L and T-T