无损检测解决方案
Specifications
| Coil Drive Signals | |
|---|---|
| Excitation Modes |
Single or multifrequency mode.
Multiplexed mode allowing time multiplexing of up to two simultaneous frequencies. |
| Number of Coil Drivers | 2 independent generator outputs |
| Number of Input/Time Slots |
Max 2 inputs per smart probe connector
Max 8 inputs for legacy connector 8 inputs total for the instrument, 32 time slots each for a total of 256 time slots |
| Frequency Range | 50 kHz to 2 MHz |
| Output Impedance, per ISO 15548-1 Section 6.2.3 | < 1.5 Ω typical at 480 kHz, current limited |
| Maximum Output Load, per ISO 15548-1 Section 6.2.5 | Up to 9W typical at 480 kHz |
| Probe inputs | |
| Input Impedance, 16-pin Connector, per ISO 15548-1 Section 6.3.2 | 850 kΩ typical |
| Input Capacitance, 16-pin Connector | 250 pF typical |
| Input Impedance, 41-pin Connector | 1 MΩ typical |
| Input Capacitance, 41-pin Connector | 220 pF typical |
| Absolute Maximum Allowable Input Voltage, per ISO 15548-1 Section 6.3.1 | ±10 V (20 V p-p) |
| Acquisition Inputs | |
| Gain | Adjustment range: −26 dB to 76 dB |
| A/D Converter | 24-bit resolution |
| Digital Filters | Programmable digital low-pass and high-pass filters |
| Maximum Acquisition Rate | 40 kHz |
| Standard | |
| Standard | DIN EN ISO 15548 |
| Network Interface | 1000BASE-T x-coded 1 Gb |
| Size (W × H × D) | 295 mm x 133 mm x 473 mm |
| Weight | 8.7 kg (19.5 lb) |
| IP Rating | IP55 |
| Total Peak Power Consumption | 85 W |
| DC Input | 24 VDC |
| Temperature Range |
Operating 0 °C–45 °C (32 °F–113 °F),
Storage −20 °C–70 °C (−4 °F–158 °F) |
| Digital I/O & Encoders |
8 digital inputs (programmable)
8 digital outputs (programmable) 2 encoder inputs (incremental, A & B phase) |
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.