The ChainSCANNER provides a manual pipe-inspection solution for pipes ranging from 45 mm to 965 mm OD (1.75 to 38 in. OD). The scanner, held by chain links instead of magnetic wheels, is well suited for weld or corrosion inspection on various material types, using UT, TOFD, and PA technologies.
The ChainSCANNER facilitates the manual inspection of pipes with outside diameters of 45 mm to 965 mm (1.75 in. to 38 in.), offering the possibility for two-axis encoding. The scanner, which is held by chain links instead of magnetic wheels, is able to inspect ferromagnetic or nonferromagnetic surfaces. The chain links also help ensure a straight displacement of the scanner by eliminating steering problems. Finally, it is useful when the area around the pipe is difficult to access as the scanner can be rotated around the pipe using the chain links.
Main applications are:
Probe-positioning system with lead screw adjustment
Note: Probes and wedges are not included with the scanner.
Length in scan axis
(mm) |
Width
(mm) |
Height
(mm) |
Weight
(kg) |
114 | 75 | 84 | 1 |
Note: specifications above apply to the main module
Encoder resolution:
Circumferential (X) axis: 19.2 steps/mm
Longitudinal (Y) axis: 56.7 steps/mm
ChainScan-A-4Probe: Extra part package needed to perform inspections with four probes on the CHAIN scanner | ChainScan-A-mouse: Extra part package needed in order to use the CHAIN scanner as a mouse scanner with magnetic-wheel holding system instead of chain links | ChainScan-A-SBar: 20 cm probe-holder bar and lead screw kit for confined space applications |
您即将被转换到我们的本地网站。